User Tools

Site Tools


Unixbench RPI 3B+

  BYTE UNIX Benchmarks (Version 4.1.0)
  System -- rpi3.unix7.org
  Start Benchmark Run: Sat Mar  9 07:42:26 UTC 2019
   1 interactive users.
   7:42AM  up 14:09, 1 user, load averages: 0.00, 0.00, 0.00
  -r-xr-xr-x  1 root  wheel  267120 Feb 13 06:17 /bin/sh
  /bin/sh: ELF 64-bit LSB executable, ARM aarch64, version 1 (FreeBSD), dynamically linked, interpreter /libexec/ld-elf.so.1, for FreeBSD 12.0 (1200502), FreeBSD-style, stripped
  /dev/ufs/rootfs   111290108 24110428 81615176    23%    /
Dhrystone 2 using register variables     6655188.2 lps   (10.0 secs, 10 samples)
Double-Precision Whetstone                 1451.8 MWIPS (9.6 secs, 10 samples)
System Call Overhead                     402720.1 lps   (10.0 secs, 10 samples)
Pipe Throughput                          371352.7 lps   (10.0 secs, 10 samples)
Pipe-based Context Switching              85133.5 lps   (10.0 secs, 10 samples)
Process Creation                           1150.3 lps   (30.0 secs, 3 samples)
Execl Throughput                            375.2 lps   (29.7 secs, 3 samples)
File Read 1024 bufsize 2000 maxblocks    231057.0 KBps  (30.0 secs, 3 samples)
File Write 1024 bufsize 2000 maxblocks    24624.0 KBps  (30.0 secs, 3 samples)
File Copy 1024 bufsize 2000 maxblocks     27712.0 KBps  (30.0 secs, 3 samples)
File Read 256 bufsize 500 maxblocks       66355.0 KBps  (30.0 secs, 3 samples)
File Write 256 bufsize 500 maxblocks      33722.0 KBps  (30.0 secs, 3 samples)
File Copy 256 bufsize 500 maxblocks       23205.0 KBps  (30.0 secs, 3 samples)
File Read 4096 bufsize 8000 maxblocks    631781.0 KBps  (30.0 secs, 3 samples)
File Write 4096 bufsize 8000 maxblocks    24161.0 KBps  (30.0 secs, 3 samples)
File Copy 4096 bufsize 8000 maxblocks     24187.0 KBps  (30.0 secs, 3 samples)
Shell Scripts (1 concurrent)                809.1 lpm   (60.0 secs, 3 samples)
Shell Scripts (8 concurrent)                305.6 lpm   (60.0 secs, 3 samples)
Shell Scripts (16 concurrent)               159.0 lpm   (60.0 secs, 3 samples)
Arithmetic Test (type = short)                1.0 lps   (0.0 secs, 3 samples)
Arithmetic Test (type = int)                  1.0 lps   (0.0 secs, 3 samples)
Arithmetic Test (type = long)                 1.0 lps   (0.0 secs, 3 samples)
Arithmetic Test (type = float)                1.0 lps   (0.0 secs, 3 samples)
Arithmetic Test (type = double)               1.0 lps   (0.0 secs, 3 samples)
Arithoh                                       1.0 lps   (0.0 secs, 3 samples)
C Compiler Throughput                     53895.6 lpm   (60.0 secs, 3 samples)
Dc: sqrt(2) to 99 decimal places          45744.0 lpm   (30.0 secs, 3 samples)
Recursion Test--Tower of Hanoi            55225.8 lps   (20.0 secs, 3 samples)


                     INDEX VALUES            
TEST                                        BASELINE     RESULT      INDEX

Dhrystone 2 using register variables        116700.0  6655188.2      570.3
Double-Precision Whetstone                      55.0     1451.8      264.0
Execl Throughput                                43.0      375.2       87.3
File Copy 1024 bufsize 2000 maxblocks         3960.0    27712.0       70.0
File Copy 256 bufsize 500 maxblocks           1655.0    23205.0      140.2
File Copy 4096 bufsize 8000 maxblocks         5800.0    24187.0       41.7
Pipe Throughput                              12440.0   371352.7      298.5
Pipe-based Context Switching                  4000.0    85133.5      212.8
Process Creation                               126.0     1150.3       91.3
Shell Scripts (8 concurrent)                     6.0      305.6      509.3
System Call Overhead                         15000.0   402720.1      268.5
                                                                 =========
     FINAL SCORE                                                     173.4

dmesg

Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-STABLE r344859 RPI3M arm64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(efifb): resolution 656x416
KLD file umodem.ko is missing dependencies
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
MAP 7ef6000 mode 2 pages 20
MAP 39f40000 mode 2 pages 1
MAP 39f45000 mode 2 pages 1
MAP 3b350000 mode 2 pages 16
MAP 3f100000 mode 1 pages 1
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofw_clkbus0
clk_fixed1: <Fixed clock> on ofw_clkbus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
local_intc0: <BCM2836 Interrupt Controller> mem 0x40000000-0x400000ff on simplebus0
intc0: <BCM2835 Interrupt Controller> mem 0x7e00b200-0x7e00b3ff irq 20 on simplebus0
gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 23,24 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
generic_timer0: <ARMv7 Generic Timer> irq 0,1,2,3 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 19200000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 19200000 Hz quality 1000
bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007eff irq 4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19 on simplebus0
bcmwd0: <BCM2708/2835 Watchdog> mem 0x7e100000-0x7e100027 on simplebus0
bcmrng0: <Broadcom BCM2835 RNG> mem 0x7e104000-0x7e10400f irq 21 on simplebus0
mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 22 on simplebus0
gpioc0: <GPIO controller> on gpio0
uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e201fff irq 25 on simplebus0
uart0: console (115200,n,8,1)
spi0: <BCM2708/2835 SPI controller> mem 0x7e204000-0x7e204fff irq 27 on simplebus0
spibus0: <OFW SPI bus> on spi0
spibus0: <unknown card> at cs 0 mode 0
spibus0: <unknown card> at cs 1 mode 0
iichb0: <BCM2708/2835 BSC controller> mem 0x7e804000-0x7e804fff irq 40 on simplebus0
bcm283x_dwcotg0: <DWC OTG 2.0 integrated USB controller (bcm283x)> mem 0x7e980000-0x7e98ffff,0x7e006000-0x7e006fff irq 46,47 on simplebus0
usbus0 on bcm283x_dwcotg0
sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff irq 49 on simplebus0
mmc0: <MMC/SD bus> on sdhci_bcm0
fb0: <BCM2835 VT framebuffer driver> on simplebus0
fbd0 on fb0
VT: Replacing driver "efifb" with new "fb".
fb0: 656x416(656x416@0,0) 24bpp
fb0: fbswap: 1, pitch 1968, base 0x3eb33000, screen_size 818688
pmu0: <Performance Monitoring Unit> irq 53 on simplebus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
bcm2835_cpufreq0: <CPU Frequency Control> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
gpioled0: <GPIO LEDs> on ofwbus0
gpioled0: <led1> failed to map pin
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
usbus0: 480Mbps High Speed USB v2.0
mmc0: No compatible cards found on bus
bcm2835_cpufreq0: ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF
ugen0.1: <DWCOTG OTG Root HUB> at usbus0
uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub0: 1 port with 1 removable, self powered
ugen0.2: <vendor 0x0424 product 0x2514> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 2> on usbus0
uhub1: MTT enabled
uhub1: 4 ports with 3 removable, self powered
ugen0.3: <vendor 0x0424 product 0x2514> at usbus0
uhub2 on uhub1
uhub2: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 3> on usbus0
uhub2: MTT enabled
uhub2: 3 ports with 2 removable, self powered
ugen0.4: <vendor 0x0424 product 0x7800> at usbus0
muge0 on uhub2
muge0: <vendor 0x0424 product 0x7800, rev 2.10/3.00, addr 4> on usbus0
muge0: Chip ID 0x7800 rev 0002
miibus0: <MII bus> on muge0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
ue0: <USB Ethernet> on muge0
ue0: Ethernet address: b8:27:eb:b4:63:55
ugen0.5: <JMicron USB to ATA/ATAPI Bridge> at usbus0
umass0 on uhub1
umass0: <JMicron USB to ATA/ATAPI Bridge, class 0/0, rev 2.10/4.05, addr 5> on usbus0
ugen0.6: <Hewlett-Packard HP LaserJet P2035> at usbus0
Release APs...done
CPU  0: ARM Cortex-A53 r0p4 affinity:  0
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
 Instruction Set Attributes 0 = <CRC32>
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <JMicron Generic 0405> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number 0123456789ABCDEF
da0: 40.000MB/s transfers
da0: 114473MB (234441648 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
 Instruction Set Attributes 1 = <>
         Processor Features 0 = <AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>
         Processor Features 1 = <0>
      Memory Model Features 0 = <4k Granule,64k Granule,MixedEndian,S/NS Mem,16bit ASID,1TB PA>
      Memory Model Features 1 = <>
      Memory Model Features 2 = <32b CCIDX,48b VA>
             Debug Features 0 = <2 CTX Breakpoints,4 Watchpoints,6 Breakpoints,PMUv3,Debug v8>
             Debug Features 1 = <0>
         Auxiliary Features 0 = <0>
         Auxiliary Features 1 = <0>
CPU  1: ARM Cortex-A53 r0p4 affinity:  1
CPU  2: ARM Cortex-A53 r0p4 affinity:  2
CPU  3: ARM Cortex-A53 r0p4 affinity:  3
WARNING: / was not properly dismounted
WARNING: /: mount pending error: blocks 112 files 4
WARNING: /: TRIM flag on fs but disk does not support TRIM
Warning: no time-of-day clock registered, system time will not be set accurately
lo0: link state changed to UP
muge0: Chip ID 0x7800 rev 0002
ue0: link state changed to DOWN
ue0: link state changed to UP