User Tools

Site Tools


Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
unixbench:rpi3b [2019-03-09 11:12]
ziggi Page name changed from unixbench:rpi3 to unixbench:rpi3b
unixbench:rpi3b [2019-03-09 11:15] (current)
ziggi
Line 1: Line 1:
 +
 +=====Unixbench RPI 3B+=====
 +
 <​file>​ <​file>​
   BYTE UNIX Benchmarks (Version 4.1.0)   BYTE UNIX Benchmarks (Version 4.1.0)
Line 54: Line 57:
                                                                  ​=========                                                                  ​=========
      FINAL SCORE                                                     173.4      FINAL SCORE                                                     173.4
 +</​file>​
 +
 +===dmesg===
 +
 +<​file>​
 +Copyright (c) 1992-2019 The FreeBSD Project.
 +Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 + The Regents of the University of California. All rights reserved.
 +FreeBSD is a registered trademark of The FreeBSD Foundation.
 +FreeBSD 12.0-STABLE r344859 RPI3M arm64
 +FreeBSD clang version 6.0.1 (tags/​RELEASE_601/​final 335540) (based on LLVM 6.0.1)
 +VT(efifb): resolution 656x416
 +KLD file umodem.ko is missing dependencies
 +Starting CPU 1 (1)
 +Starting CPU 2 (2)
 +Starting CPU 3 (3)
 +FreeBSD/​SMP:​ Multiprocessor System Detected: 4 CPUs
 +random: unblocking device.
 +random: entropy device external interface
 +MAP 7ef6000 mode 2 pages 20
 +MAP 39f40000 mode 2 pages 1
 +MAP 39f45000 mode 2 pages 1
 +MAP 3b350000 mode 2 pages 16
 +MAP 3f100000 mode 1 pages 1
 +kbd0 at kbdmux0
 +ofwbus0: <Open Firmware Device Tree>
 +simplebus0: <​Flattened device tree simple bus> on ofwbus0
 +ofw_clkbus0:​ <OFW clocks bus> on ofwbus0
 +clk_fixed0: <Fixed clock> on ofw_clkbus0
 +clk_fixed1: <Fixed clock> on ofw_clkbus0
 +regfix0: <Fixed Regulator>​ on ofwbus0
 +regfix1: <Fixed Regulator>​ on ofwbus0
 +psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
 +local_intc0:​ <BCM2836 Interrupt Controller>​ mem 0x40000000-0x400000ff on simplebus0
 +intc0: <BCM2835 Interrupt Controller>​ mem 0x7e00b200-0x7e00b3ff irq 20 on simplebus0
 +gpio0: <​BCM2708/​2835 GPIO controller>​ mem 0x7e200000-0x7e2000b3 irq 23,24 on simplebus0
 +gpiobus0: <OFW GPIO bus> on gpio0
 +generic_timer0:​ <ARMv7 Generic Timer> irq 0,1,2,3 on ofwbus0
 +Timecounter "ARM MPCore Timecounter"​ frequency 19200000 Hz quality 1000
 +Event timer "ARM MPCore Eventtimer"​ frequency 19200000 Hz quality 1000
 +bcm_dma0: <BCM2835 DMA Controller>​ mem 0x7e007000-0x7e007eff irq 4,​5,​6,​7,​8,​9,​10,​11,​12,​13,​14,​15,​16,​17,​18,​19 on simplebus0
 +bcmwd0: <​BCM2708/​2835 Watchdog>​ mem 0x7e100000-0x7e100027 on simplebus0
 +bcmrng0: <​Broadcom BCM2835 RNG> mem 0x7e104000-0x7e10400f irq 21 on simplebus0
 +mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 22 on simplebus0
 +gpioc0: <GPIO controller>​ on gpio0
 +uart0: <​PrimeCell UART (PL011)> mem 0x7e201000-0x7e201fff irq 25 on simplebus0
 +uart0: console (115200,​n,​8,​1)
 +spi0: <​BCM2708/​2835 SPI controller>​ mem 0x7e204000-0x7e204fff irq 27 on simplebus0
 +spibus0: <OFW SPI bus> on spi0
 +spibus0: <unknown card> at cs 0 mode 0
 +spibus0: <unknown card> at cs 1 mode 0
 +iichb0: <​BCM2708/​2835 BSC controller>​ mem 0x7e804000-0x7e804fff irq 40 on simplebus0
 +bcm283x_dwcotg0:​ <DWC OTG 2.0 integrated USB controller (bcm283x)>​ mem 0x7e980000-0x7e98ffff,​0x7e006000-0x7e006fff irq 46,47 on simplebus0
 +usbus0 on bcm283x_dwcotg0
 +sdhci_bcm0: <​Broadcom 2708 SDHCI controller>​ mem 0x7e300000-0x7e3000ff irq 49 on simplebus0
 +mmc0: <MMC/SD bus> on sdhci_bcm0
 +fb0: <BCM2835 VT framebuffer driver> on simplebus0
 +fbd0 on fb0
 +VT: Replacing driver "​efifb"​ with new "​fb"​.
 +fb0: 656x416(656x416@0,​0) 24bpp
 +fb0: fbswap: 1, pitch 1968, base 0x3eb33000, screen_size 818688
 +pmu0: <​Performance Monitoring Unit> irq 53 on simplebus0
 +cpulist0: <Open Firmware CPU Group> on ofwbus0
 +cpu0: <Open Firmware CPU> on cpulist0
 +bcm2835_cpufreq0:​ <CPU Frequency Control> on cpu0
 +cpu1: <Open Firmware CPU> on cpulist0
 +cpu2: <Open Firmware CPU> on cpulist0
 +cpu3: <Open Firmware CPU> on cpulist0
 +gpioled0: <GPIO LEDs> on ofwbus0
 +gpioled0: <​led1>​ failed to map pin
 +cryptosoft0:​ <​software crypto>
 +Timecounters tick every 1.000 msec
 +iicbus0: <OFW I2C bus> on iichb0
 +iic0: <I2C generic I/O> on iicbus0
 +usbus0: 480Mbps High Speed USB v2.0
 +mmc0: No compatible cards found on bus
 +bcm2835_cpufreq0:​ ARM 600MHz, Core 250MHz, SDRAM 400MHz, Turbo OFF
 +ugen0.1: <DWCOTG OTG Root HUB> at usbus0
 +uhub0: <DWCOTG OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
 +uhub0: 1 port with 1 removable, self powered
 +ugen0.2: <vendor 0x0424 product 0x2514> at usbus0
 +uhub1 on uhub0
 +uhub1: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 2> on usbus0
 +uhub1: MTT enabled
 +uhub1: 4 ports with 3 removable, self powered
 +ugen0.3: <vendor 0x0424 product 0x2514> at usbus0
 +uhub2 on uhub1
 +uhub2: <vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 3> on usbus0
 +uhub2: MTT enabled
 +uhub2: 3 ports with 2 removable, self powered
 +ugen0.4: <vendor 0x0424 product 0x7800> at usbus0
 +muge0 on uhub2
 +muge0: <vendor 0x0424 product 0x7800, rev 2.10/3.00, addr 4> on usbus0
 +muge0: Chip ID 0x7800 rev 0002
 +miibus0: <MII bus> on muge0
 +ukphy0: <Generic IEEE 802.3u media interface>​ PHY 1 on miibus0
 +ukphy0: ​ none, 10baseT, 10baseT-FDX,​ 100baseTX, 100baseTX-FDX,​ 1000baseT, 1000baseT-master,​ 1000baseT-FDX,​ 1000baseT-FDX-master,​ auto
 +ue0: <USB Ethernet>​ on muge0
 +ue0: Ethernet address: b8:​27:​eb:​b4:​63:​55
 +ugen0.5: <JMicron USB to ATA/ATAPI Bridge> at usbus0
 +umass0 on uhub1
 +umass0: <JMicron USB to ATA/ATAPI Bridge, class 0/0, rev 2.10/4.05, addr 5> on usbus0
 +ugen0.6: <​Hewlett-Packard HP LaserJet P2035> at usbus0
 +Release APs...done
 +CPU  0: ARM Cortex-A53 r0p4 affinity: ​ 0
 +Trying to mount root from ufs:/​dev/​ufs/​rootfs [rw]...
 + ​Instruction Set Attributes 0 = <​CRC32>​
 +da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
 +da0: <JMicron Generic 0405> Fixed Direct Access SPC-4 SCSI device
 +da0: Serial Number 0123456789ABCDEF
 +da0: 40.000MB/s transfers
 +da0: 114473MB (234441648 512 byte sectors)
 +da0: quirks=0x2<​NO_6_BYTE>​
 + ​Instruction Set Attributes 1 = <>
 +         ​Processor Features 0 = <​AdvSIMD,​Float,​EL3 32,EL2 32,EL1 32,EL0 32>
 +         ​Processor Features 1 = <0>
 +      Memory Model Features 0 = <4k Granule,64k Granule,​MixedEndian,​S/​NS Mem,16bit ASID,1TB PA>
 +      Memory Model Features 1 = <>
 +      Memory Model Features 2 = <32b CCIDX,48b VA>
 +             Debug Features 0 = <2 CTX Breakpoints,​4 Watchpoints,​6 Breakpoints,​PMUv3,​Debug v8>
 +             Debug Features 1 = <0>
 +         ​Auxiliary Features 0 = <0>
 +         ​Auxiliary Features 1 = <0>
 +CPU  1: ARM Cortex-A53 r0p4 affinity: ​ 1
 +CPU  2: ARM Cortex-A53 r0p4 affinity: ​ 2
 +CPU  3: ARM Cortex-A53 r0p4 affinity: ​ 3
 +WARNING: / was not properly dismounted
 +WARNING: /: mount pending error: blocks 112 files 4
 +WARNING: /: TRIM flag on fs but disk does not support TRIM
 +Warning: no time-of-day clock registered, system time will not be set accurately
 +lo0: link state changed to UP
 +muge0: Chip ID 0x7800 rev 0002
 +ue0: link state changed to DOWN
 +ue0: link state changed to UP
 </​file>​ </​file>​